Serving League City & the Houston Bay AreaCall (346) 521-5586

Single, double and custom-size vanities

Bathroom Vanity Tops in League City, TX

A stone or quartz top cut for your sink and faucet, replacing cultured marble or builder-grade tops.

  • Free in-home measuring and estimates
  • Written, itemized quote before any slab is cut
  • Digital or physical templates taken after cabinets are set

Upgrading the Top on Your Vanity

Bathroom vanity tops are small jobs with a large effect. Swapping a one-piece cultured marble top or an older granite top for quartz or natural stone changes how the whole bathroom reads, and on a sound cabinet it does not require tearing anything else out. We cut vanity tops for single and double vanities, custom-width cabinets and makeup counters, with sink and faucet holes made to the fixtures you choose.

Material choices for a bathroom

Quartz is the most common pick for bathrooms: it does not need sealing, and toothpaste, makeup and hair dye wipe off. Granite works well too and costs less in some colors. Marble is more practical in a bathroom than in a kitchen because it sees less acid and less wear, though perfume, some cleaners and hair products can still etch a polished surface. HomeGuide lists a 20 by 36 inch marble vanity top at about $200 to $750. HomeAdvisor's 2026 vanity guide lists quartz at $50 to $200 per square foot and cultured marble at $40 to $180.

Remnants make sense here

A vanity top often needs only a few square feet, which means it can sometimes be cut from a remnant, the leftover piece from a larger slab. Remnant availability changes constantly, but it can bring natural stone or quartz within reach for a powder room or small vanity. If you are flexible on color, tell us at the estimate.

Sinks, faucets and splashes

Most stone vanity tops use undermount sinks, either oval or rectangular. Vessel sinks need a smaller drain hole instead of a full cutout. Faucets come in single-hole, 4-inch centerset and 8-inch widespread layouts, and the holes are drilled in the stone to match, so the faucet should be chosen before we template. A 4-inch backsplash and sidesplashes are usually cut from the same material; full-height splashes are also possible.

Thickness and edges

Vanity tops are often 2 cm thick, slightly thinner than kitchen counters, though 3 cm is common in primary bathrooms. A simple eased or bevel edge suits most vanities. Because vanities are often against a wall on one or both sides, we measure each wall for square so the top fits tight without a large caulk line.

Removing the old top

Cultured marble tops are usually glued down and come off in one piece. Older granite or tile may take more work. We disconnect the faucet and drain, remove the old top, check the cabinet for water damage or soft spots near the plumbing, then set and reconnect the new top. Many Bay Area homes have two or three vanities, and doing them together usually costs less per top than one at a time.

What This Covers

Vanity top work for any bathroom in the house.

Single and double vanity tops

Quartz, granite or marble cut to the cabinet, with one or two sink cutouts.

Undermount and vessel sinks

Cutouts or drain holes made to the template of the sink you choose.

Faucet drilling

Single-hole, centerset or widespread holes placed to fit your faucet.

Backsplash and sidesplash

Matching 4-inch splashes or a taller splash cut from the same material.

Kitchen Countertop Replacement in League City, TX

Typical Vanity Top Costs

ItemPublished range
Quartz (per sq ft)$50 to $200
Cultured marble (per sq ft)$40 to $180
Granite slab (per sq ft)$40 to $100
Marble vanity top, 20 x 36 in$200 to $750
Sink installation (labor, average)about $400
Full vanity installation$300 to $2,200

National figures from HomeAdvisor (2026) and HomeGuide. Houston-area prices can differ, and the size, material and plumbing changes affect the total. Your written estimate is the price.

How It Works

1. Measure

We measure each vanity, check the walls for square and note the sink and faucet.

2. Select

You choose the material, edge and splash, including remnant options if available.

3. Fabricate

The top is cut with sink and faucet holes to match your fixtures.

4. Install

Old top off, cabinet checked, new top set and plumbing reconnected.

Bathroom Vanity Tops in League City, TX

Bathroom Vanity Tops Questions

How much does a new bathroom vanity top cost?

It depends on size and material. HomeGuide lists a standard 20 by 36 inch marble vanity top at $200 to $750, and HomeAdvisor lists quartz at $50 to $200 per square foot. We give a written price after measuring.

Can I replace just the vanity top and keep my cabinet?

Yes, if the cabinet is solid and dry. We check for soft spots or water damage around the plumbing before setting a new top.

Is marble a good choice for a bathroom vanity?

It works better in a bathroom than in a kitchen because it sees less acid and wear. Perfume and some cleaners can still etch polished marble, so a honed finish or quartz is worth considering if that bothers you.

What thickness should a vanity top be?

2 cm is common for bathroom vanities and keeps cost down; 3 cm gives a heavier look and is often used in primary bathrooms. Both work on standard vanity cabinets.

Get a Bathroom Vanity Tops Estimate

Free estimates for bathroom vanity tops.

Call Now: (346) 521-5586